| Weight | 6 kg |
|---|---|
| Dimensions | 20 × 20 × 20 in |
CODE:100606
The ultimate off-road legend in 1:10 scale, the Yikong YK41011 4WD Crawler.
Rugged, detailed, and built for any terrain. With its body styled after the legendary Land Cruiser 79 (LC79), the Yikong YK41011 brings the spirit of indestructible off-roaders to the trail. This pickup doesn’t just look good on the shelf – it belongs in the mud, on the rocks, and out in the woods.
Beneath the scale-accurate body lies proven crawler technology built on a rugged 1/10 chassis. At its heart are the metal portal axles for maximum ground clearance. The front and rear differentials can be manually locked – letting you mechanically prepare your vehicle for any obstacle, just like the full-size originals.
Top Features & Highlights
- LCG Design: Tub chassis (low bed) for a low center of gravity and high tip-over stability.
- Metal Portal Axles: Increased ground clearance and a scale-accurate look at the front and rear axles.
- Manually Lockable Differentials: Mechanical locking function right at the front and rear axles for maximum traction.
- 2-Speed Transmission: Switchable via remote control between precise, controlled climbing (Low) and brisk trail speed (High) – gear ratios 70.30 / 30.20.
- Hobbywing 60A ESC: Waterproof speed controller (type 1060) with a T-plug, suitable for 2S/3S LiPo and 7.2 V NiMH.
- Full-Metal Drivetrain: Fully ball-bearing equipped, all-metal gearbox (with a plastic main gear) and U-joint driveshafts for high durability.
- Tool-Free Battery Swap: Battery compartment with an R-pin quick-release and hook-and-loop straps for various battery sizes.
- 25 kg Steering Servo: Metal-gear servo with an aluminum horn and buffer protection to absorb impacts.
Technical Specifications
| Scale: | 1:10 |
| Body: | Pickup styled after the Land Cruiser 79 (LC79), painted |
| Colors: | Gray, Yellow |
| Wheelbase: | 325 mm |
| Track width: | approx. 250 mm |
| Ground clearance: | 65 mm |
| Tires: | 2.2″, approx. 116 × 42 mm |
| Dimensions (L×W×H): | 535 × 250 × 230 mm |
| Weight: | approx. 2,545 g |
| Speed: | approx. 20 km/h (with 3S LiPo) |
| Drivetrain: | 4WD (all-wheel drive) |
| Motor: | 550 high-torque brushed motor (32T), 14T pinion |
| Speed Controller (ESC): | Hobbywing 1060, 60A, waterproof, T-plug |
| Steering Servo: | 25 kg, metal gears, with buffer protection |
| Battery: | 2S/3S LiPo (7.4 / 11.1 V) or 7.2 V NiMH – not included |
| Remote Control: | 2.4 GHz, 4-channel transmitter with 6-channel receiver |
What’s Included
Pre-assembled YK41011 Crawler (RTR), painted body, 2.4 GHz remote control, instruction manual. (Still required: drive battery (2S/3S LiPo or NiMH), a compatible charger, and 4× AA batteries for the transmitter.)
