| Weight | 2 kg |
|---|---|
| Dimensions | 7 × 7 × 5 in |
The CNHL Racing Series 5200mAh 11.1V 3S 90C LiPo Battery with EC5 Plug is a high-output 3S battery for RC cars, trucks, boats, crawlers and dual-3S power systems that need a practical balance of capacity, current capability and runtime.
Its 5200mAh capacity sits in a useful middle range for performance RC use, while the 90C continuous rating, 10AWG wires and EC5 connector support demanding brushless systems. One pack can be used in a compatible 3S vehicle, or two matched packs can be connected in series to form a 6S 5200mAh system.
Before ordering, confirm the battery tray, connector, voltage, cable routing and the approximately 395g installed weight.
| Check Item | Your Model Should Match | This Battery |
|---|---|---|
| Cell Count | 3S system or dual-3S series setup | 11.1V nominal / 3S1P |
| Maximum Voltage | ESC supports standard 3S LiPo voltage | 12.6V fully charged |
| Battery Space | Tray accepts a long 3S softcase pack | 160 × 45 × 28mm |
| Installed Weight | Vehicle or boat supports this battery mass | Approx. 395g |
| Connector | EC5 or physically compatible IC5 main power connection | EC5 Plug |
| Power Demand | Battery and wiring match the measured system load | 90C continuous / 180C burst |
